Enviro-Drip™ Pressure Compensating
Enviro Drip™ Lilac PC applies water to the plants at a slow consistent rate, reducing the risk of run-off and water wastage. Particularly suited to areas like garden beds where overspray cannot be tolerated. Enviro Drip™ Lilac PC is for use with non-potable treated water when not using mains water. As it’s Pressure compensating this is ideal for undulating terrain in commercial areas when mains water is not used for the water source
- Enviro Drip™Lilac is a 13mm tube to suit a variety of landscape applications. Use with Australian standard poly fittings.
- Enviro Drip™ pressure compensating (PC) tube to suit the landscape requirements. PC provides even water application over steep and undulating terrain and allows for longer runs.
- Enviro Drip™ applies water slowly to penetrate the root zone. Select from a range of spacings to suit your requirements.
- Clog minimisation
- Two directly opposed outlet holes minimise chance of clogging. Visible Emitter The clearly visible emitter is easily aligned with plants for targeted watering and can be avoided when cutting through the tube, making it easier to insert the poly fittings.
| Tube inside diameter | 12.9mm |
| Tube outside diameter | 15.4mm |
| Emitter discharge | 1.6 and 2Lph |
| Emitter spacing | (1.6 Lph): 30cm & (2 Lph): 30, 50cm |
| Recommended operating pressure | 100-300kPa |
| Tube pressure rating | 300kPa |
| Roll lengths | (1.6 Lph): 200m & (2 Lph): 50, 100, 200m |
| Colour | Lila |
| Water source | For use with non-potable, treated water |
